Users Guide

13–Fibre Channel Over Ethernet
FCoE Boot from SAN
235 BC0054508-00 M
6. Select Add FCoE SAN, and then click Add drive (Figure 13-23).
Figure 13-23. Adding FCoE SAN Drive
7. For each interface intended for FCoE boot, select the interface, clear the
Use DCB check box, select Use auto vlan, and then click Add FCoE
Disk(s) (Figure 13-24).
Figure 13-24. Configuring FCoE Parameters
8. Repeat steps 8 through 10 for all initiator ports.