Users Guide

13–Fibre Channel Over Ethernet
FCoE Boot from SAN
227 BC0054508-00 M
5. Ensure that FCoE Enable is set to yes on the 10GbE Marvell initiator ports
that you want to use as the SAN boot paths (Figure 13-15).
Figure 13-15. Enabling FCoE
6. For each interface to be enabled for FCoE boot:
a. Click Change Settings.
b. On the Change FCoE Settings window (Figure 13-16), ensure that
FCoE Enable and Auto_VLAN are set to yes.
c. Ensure that DCB Required is set to no.
d. Click Next to save the settings.