Users Guide

10–iSCSI Protocol
iSCSI Offload in Windows Server
132 BC0054508-00 M
On this page, you can change the iSCSI-Offload MTU size, the
iSCSI-Offload VLAN ID, the IPv4/IPv6 DHCP setting, the IPv4/IPv6 Static
Address/Subnet Mask/Default Gateway settings, and the IPv6 Process
Router Advertisements setting (see Figure 10-6).
Figure 10-6. Configuring iSCSI Using QCC
4. DHCP is the default for IP address assignment, but you can change it to a
static IP address assignment, if this is the preferred method of IP address
assignment.
5. Click Apply and close QCC GUI.
NOTE
The iSCSI-Offload IP address assignment method cannot be changed
if the adapter port was used for iSCSI-Offload remote boot.