Users Guide

10–iSCSI Protocol
iSCSI Offload in Windows Server
131 BC0054508-00 M
 Configuring Marvell iSCSI Using QCC
 Configuring Microsoft Initiator to Use the Marvell iSCSI Offload
Installing Marvell Drivers and Management Applications
Install the Windows drivers and management applications.
Installing the Microsoft iSCSI Initiator
For Windows Server 2012 and later, the iSCSI initiator is included inbox. To
download the iSCSI initiator from Microsoft (if not already installed), locate the
direct link for your system here:
http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=18986
Configuring Marvell iSCSI Using QCC
Use the QConvergeConsole (QCC) GUI to manage all of Marvell’s network
adapters and advanced features. For more information, see the QCC GUI online
help.
1. Open QCC GUI.
2. Select the Marvell BCM57xx and BCM57xxx C-NIC iSCSI adapter. If the
C-NIC iSCSI adapter instance is not present in the QCC GUI tree view,
select the VBD device (the item between the PORT and the Ethernet/NDIS
or iSCSI-Offload or FCoE-Offload items in the tree view) and enable iSCSI
offload by selecting iSCSI Offload Engine from the Resource Config tab
(see Figure 13-36 on page 246).
3. In the iSCSI-Offload item (in the tree view), select the Configuration tab.