Users Guide

9–Windows Driver Software
Removing the Device Drivers
100 BC0054508-00 M
Removing the Device Drivers
When removing the device drivers, any management application that is installed is
also removed.
To remove the device drivers:
1. In the Control Panel, double-click Add or Remove Programs.
2. Click QLogic Drivers and Management Applications, and then click
Remove. Follow the on-screen prompts.
3. Reboot your system to completely remove the drivers. If you fail to reboot
your system, you cannot successfully install the drivers.
Viewing or Changing the Properties of the
Adapter
To view or change the properties of a Marvell network adapter:
1. In the Control Panel, click Marvell Control Suite.
2. Click the Advanced section of the Configurations page.
Setting Power Management Options
You can set power management options to allow the operating system to turn off
the controller to save power or to allow the controller to wake up the computer. If
the device is busy doing something (servicing a call, for example) however, the
operating system will not shut down the device. The operating system attempts to
shut down every possible device only when the computer attempts to go into
hibernation.