Users Guide

3–Fibre Channel Configuration
Running Diagnostics—Fibre Channel Ping and Trace Route
83 BK3254601-00 J
Figure 3-32 shows an example.
Figure 3-32. Running Fibre Channel Trace Route from QConvergeConsole GUI
The Fibre Channel trace route output from QConvergeConsole GUI shows a
symbol of a red payload that starts from the host. The travel across the route is
also highlighted in red. The payload enters and exits from the appropriate port on
each switch as it traverses the path until it reaches the selected target.
The results appear as a success message output from the following:
 QConvergeConsole GUI
 QConvergeConsole CLI
 Diagnostics area
For information about using Fibre Channel trace route in QConvergeConsole
VMware vCenter Server Plug-in or QConvergeConsole VMware vSphere Web
Client Plug-in, see the section “Diagnostic Tests—Fibre Channel Port” in the
User’s Guide—QConvergeConsole Plug-ins for VMware vSphere (part number
SN0054677-00).
NOTE
You can also execute the CT FTR test.