Users Guide

3–Fibre Channel Configuration
Configuring and Verifying FA-BLD
74 BK3254601-00 J
Figure 3-25 shows an example of the adapter and boot device configuration.
Figure 3-25. Configuring Adapter and Boot Device
Configuring a Zone in a Brocade Switch
To configure a zone in a Brocade switch:
1. Create a boot LUN configuration as follows:
bootluncfg --add 50:00:53:37:63:FA:00:05
20:02:00:11:0d:51:5c:01 0000000000000000
2. Create a zone named with the following:
 Device’s PWWN
 Specific information about the target WWN
 LUN to be booted from
3. Add a zone to the zoneset configuration as follows:
cfgadd config, "BFA_5000533763fa0005_BLUN"
4. To save the zoneset, issue the following command:
cfgsave
5. Enable zoneset configuration to have it actively running:
cfgenable config