Users Guide

3–Fibre Channel Configuration
Configuring and Verifying FA-BLD
72 BK3254601-00 J
Figure 3-23 shows an example.
Figure 3-23. Enabling Host Bus Adapter Port BIOS
To enable fabric-assigned boot LUN:
1. In QConvergeConsole GUI, select the Host tab in the left pane.
2. In the system tree, expand the adapter node and then select a port node.
3. In the content pane on the right, click the Parameters tab.
4. On the Parameters page, click the Boot Device Selection tab.
5. On the Boot Device Selection page, select the Enable Fabric Assigned
Boot LUN check box.
6. Click Save.