Users Guide

3–Fibre Channel Configuration

Setting an FA-PWWN

68 BK3254601-00 J

5: Hard Loop ID

6: Loop Reset Delay (seconds)

7: Enable BIOS

8: Enable Fibre Channel Tape Support

9: Operation Mode

10: Interrupt Delay Timer (100 microseconds)

11: Execution Throttle

12: Login Retry Count

13: Port Down Retry Count

14: Enable LIP Full Login

15: Link Down Timeout (seconds)

16: Enable Target Reset

17: LUNs per Target

18: Enable Receive Out of Order Frame

19: Enable LR

20: Enable Fabric Assign WWN

21: Commit Changes

22: Abort Changes

(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)

Please enter selection: 20

QConvergeConsole

Version 1.1.3 (Build 22)

Enable Fabric Assign WWN Menu

1: Enable

2: Disable (current)

(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)

Please enter selection: 1

The Execution Throttle parameter is no longer supported for Fibre Channel 16G and

higher.