Users Guide

3–Fibre Channel Configuration
Setting an FA-PWWN
67 BK3254601-00 J
After refreshing the Brocade
®
switch, the Port Info page shows the Port
Name as shown in Figure 3-18.
Figure 3-18. New FA-PWNN Port Name in GUI
Setting FA-PWWN with QConvergeConsole CLI
To set the FA-PWWN from the adapter using QConvergeConsole CLI:
1. In the interactive mode of QConvergeConsole CLI, select Main Menu, and
then click Adapter Configuration.
2. Select HBA Parameters.
3. Select the appropriate port.
4. Select Configuration HBA Parameters.
5. Select Enable Fabric Assign WWN.
6. On the Enable Fabric Assign WWN Menu, select 1: Enable.
7. Select the option to Commit Changes.
The following shows an example of setting the FA-PWWN:
HBA Desc. : QLE2742 QLogic 2-port 32Gb Fibre Channel Adapter
FW Version : 7.04.00
WWPN : 21-00-00-OE-1E-11-4A-38
WWNN : 21-00-00-OE-1E-11-4A-38
Link : Online
===============================================================
1: Connection Options
2: Data Rate
3: Frame Size
4: Enable HBA Hard Loop ID