Users Guide

3–Fibre Channel Configuration
Setting an FA-PWWN
66 BK3254601-00 J
Setting FA-PWWN with QConvergeConsole GUI
Before setting the FA-PWWN, the port name appears on the Port Info page as
shown in the example in Figure 3-17.
Figure 3-17. Before Setting the FA-PWWN in the GUI
To set the FA-PWWN from the adapter using QConvergeConsole GUI:
1. In the QConvergeConsole GUI tree pane on the left, select an adapter,
expand the adapter node, and then select a port.
2. In the content pane on the right, click the Parameters tab.
3. On the Parameters page, click the Advanced HBA Parameters tab.
4. Under Configure Port Advanced Parameters, select the Enable Fabric
Assigned WWN check box, and then click Save.