Users Guide

3–Fibre Channel Configuration
Configuring the UEFI Driver
61 BK3254601-00 J
Table 3-5 describes the Firmware and Device Information settings.
8. To return to the Main Configuration Page, click Back.
9. On the Main Configuration Page, select Fibre Channel Target
Configuration, and then press ENTER.
The Fibre Channel Target Configuration page appears. Figure 3-15 shows
an example.
Figure 3-15. Fibre Channel Target Configuration
Table 3-5. Firmware and Device Information Settings
Setting Description
Chip Type Type of intelligent storage peripheral (ISP) controller
used in the adapter.
PCI Device ID Unique PCI device ID of the adapter.
Bus:Device:Function PCI address of the adapter in the Bus:Device:Function
(BDF) notation.
Family Firmware Version Adapter firmware version information.
EFI Driver Version Adapter extensible firmware interface (EFI) driver ver-
sion information.