Users Guide

3–Fibre Channel Configuration
Configuring the UEFI Driver
60 BK3254601-00 J
6. To return to the Main Configuration Page, click Back.
7. On the Main Configuration Page, select Firmware and Device Information,
and then press ENTER.
The Firmware and Device Information page provides the adapter and
firmware version information, and port address information. Figure 3-14
shows an example.
Figure 3-14. Dell System Setup: Firmware and Device Information
Virtual World Wide Node
Name
Indicates the adapter port’s unique virtual WWNN.
World Wide Port Name Indicates the adapter port’s unique WWPN.
Virtual World Wide Port
Name
Indicates the adapter port’s unique virtual WWPN.
a
Loop support is available only at port speeds up to and including 8Gbps. At 16Gbps and 32Gbps,
loop is not supported.
Table 3-4. Port Configuration Page Settings (Continued)
Setting Description