Users Guide

3–Fibre Channel Configuration
Configuring Selective LUNs
55 BK3254601-00 J
Configuring Fibre Channel Driver Parameters with
QConvergeConsole VMware vCenter Server Plug-in
For details on how to configure the Fibre Channel driver parameters using the
QConvergeConsole plug-in, see the User’s Guide—QConvergeConsole Plug-ins
for VMware vSphere (part number SN0054677-00).
Configuring Selective LUNs
The QConvergeConsole GUI cannot be used for configuring selective LUNs.
To configure selective LUNs with the interactive QConvergeConsole CLI, refer to
the section about the Fibre Channel interactive commands in the User’s
Guide—QConvergeConsole CLI (part number SN0054667-00).
To configure selective LUNs with the noninteractive QConvergeConsole CLI, refer
to the section about the Fibre Channel noninteractive commands in the User’s
Guide—QConvergeConsole CLI (part number SN0054667-00).
Configuring OoOFR
Out-of-order frame reassembly (OoOFR) reassembles out-of-order frames as
they are received, minimizing network congestion by eliminating the
retransmission of frames and exchanges. To configure OoOFR, use either
QConvergeConsole GUI or CLI.
Configuring OoOFR with QCC GUI
To enable OoOFR with QConvergeConsole GUI:
1. In the QConvergeConsole system tree pane on the left, select a Fibre
Channel port.
2. In the content pane on the right, click Parameters.
3. Click the Advanced HBA Parameters tab.
4. Select the Enable Receive Out of Order Frame check box.
Configuring OoOFR with Interactive QCC CLI
To enable OoOFR with the interactive QConvergeConsole CLI:
1. On the Fibre Channel Adapter Configuration menu, select HBA
Parameters.
2. On the port menu, select a port to open the HBA Parameters menu.