Users Guide

3–Fibre Channel Configuration
Configuring Fibre Channel Driver Parameters
53 BK3254601-00 J
5. Move the slider to select a low, medium, or high priority, as shown in
Figure 3-10.
Figure 3-10. Setting the QoS by Priority
6. Click Save.
To set the QoS by priority with interactive QConvergeConsole CLI:
1. From the Fibre Channel Adapter Configuration menu, select the QoS
option.
2. From the port menu, select a port to open the QoS Type Menu.
Select 1: QoS Priority to set the priority.
Configuring Fibre Channel Driver Parameters
Use QConvergeConsole GUI, CLI, or VMware plug-in to configure Fibre Channel
driver parameters:
 Configuring Fibre Channel Driver Parameters with QConvergeConsole GUI
 Configuring Fibre Channel Driver Parameters with Interactive
QConvergeConsole CLI
 Configuring Fibre Channel Driver Parameters with Noninteractive
QConvergeConsole CLI
 Configuring Fibre Channel Driver Parameters with QConvergeConsole
VMware vCenter Server Plug-in