Users Guide

3–Fibre Channel Configuration
Configuring Virtual Ports (NPIV)
52 BK3254601-00 J
6. Move the slider to select the bandwidth speed, as shown in Figure 3-9.
Figure 3-9. Setting the QoS by Bandwidth Speed
7. Click Save.
To set the QoS by bandwidth speed with interactive QConvergeConsole CLI:
1. On the Fibre Channel Adapter Configuration menu, select the QoS
option.
2. From the port menu, select a port to open the QoS Type Menu.
Select 2: QoS Bandwidth to set the bandwidth speed.
Setting QoS by Priority
To set the QoS by priority with QConvergeConsole GUI:
1. In the QConvergeConsole tree pane on the left, expand a 2700 Series
Adapter.
2. Select a virtual port.
3. In the content pane on the right, click the QoS tab.
4. In the QoS Type box, select Priority.