Users Guide

3–Fibre Channel Configuration
Configuring Virtual Ports (NPIV)
51 BK3254601-00 J
Figure 3-8 shows an example.
Figure 3-8. Setting the QoS by Bandwidth Percentage
7. Click Save.
To set the QoS by bandwidth speed with QConvergeConsole GUI:
1. In the QConvergeConsole tree pane on the left, expand a 2700 Series
Adapter.
2. Select a virtual port.
3. In the content pane on the right, click the QoS tab.
4. In the QoS Type box, select Bandwidth.
5. In the View By box, select Bandwidth Speed.
Phy QLE2742 0:
Virt QLE2742 0:
Virt QLE2742 1:
QLE2742