Manualshelf

Users Guide

ManualsBrandsDell ManualsConverged InfrastructureQLogic Family of Adapters
51525354555657585960
3–Fibre Channel Configuration
Setting Fibre Channel Adapter Parameters
43 BK3254601-00 J
Setting Fibre Channel Adapter Parameters
Use QConvergeConsole to set Fibre Channel adapter parameters:
Setting Fibre Channel Adapter Parameters with QConvergeConsole GUI
Setting Fibre Channel Adapter Parameters with Interactive
QConvergeConsole CLI
Setting Fibre Channel Adapter Parameters with Noninteractive
QConvergeConsole CLI
Setting Fibre Channel Adapter Parameters with
QConvergeConsole GUI
For information about how to set Fibre Channel adapter parameters using
QConvergeConsole GUI, refer to the topic about managing Fibre Channel and
Fibre Channel over Ethernet (FCoE) adapter ports in the QConvergeConsole
Help.
Setting Fibre Channel Adapter Parameters with Interactive
QConvergeConsole CLI
To set Fibre Channel adapter parameters with interactive
QConvergeConsole CLI:
1. On the Fibre Channel Adapter Configuration menu, select HBA
Parameters.
2. On the port menu, select a port to open the HBA Parameters menu.
3. On the HBA Parameters menu, select the Configure HBA Parameters
option to open the Configure Parameters menu.
For more information, refer to the section about the Fibre Channel interactive
commands in the User’s Guide—QConvergeConsole CLI (part number
SN0054667-00).
NOTE
The QLE2742 32Gbps FC HBA does not link up with the Auto setting when
it is connected to a Dell EMC S4148U-ON switch.