Users Guide

31 BK3254601-00 J
3 F ibre Channel Configuration
This chapter provides the following information about configuring Fibre Channel:
 “Updating the Dell Firmware” on page 32
 “Using Fast!UTIL for Custom Configuration” on page 36
 “Setting Fibre Channel Adapter Parameters” on page 43
 “Configuring Target Persistent Binding” on page 44
 “Configuring Boot Devices” on page 46
 “Configuring Virtual Ports (NPIV)” on page 47
 “Configuring Fibre Channel Driver Parameters” on page 53
 “Configuring Selective LUNs” on page 55
 “Configuring OoOFR” on page 55
 “Configuring the UEFI Driver” on page 56
 “Setting Queue Depth” on page 63
 “Setting an FA-PWWN” on page 65
 “Configuring and Verifying FA-BLD” on page 71
 “Using a Fabric-Assigned Boot LUN” on page 77
 “Running Diagnostics—Fibre Channel Ping and Trace Route” on page 79
 “Configuring CS_CTL QoS” on page 84
 “Configuring End-to-End CS_CTL QoS” on page 87
 “Configuring FDMI” on page 93
 “Enabling QLogic Forward Error Correction” on page 98
 “Running Extended Link Service Commands” on page 100