Users Guide

2–Driver Installation and Configuration
VMware Driver Installation and Configuration
17 BK3254601-00 J
Verifying the Version of the Installed Driver
To verify the installed package in the system, issue the following command:
esxcli software vib list | grep qlnativefc
The driver version is embedded in the VIB version.
For example, the output looks like the following:
# esxcli software vib list | grep qlnativefc
qlnativefc 2.1.50.0-1OEM.600.0.0.2768847
QLogic VMwareCertified 2017-01-19
Installing the QConvergeConsole VMware vCenter Server
Plug-in
The following installation sections apply to VI Server, Web Client, and HTML5
Client plug-ins.
It is advised to use HTML5 Plug-in for ESXi 6.5 and later.
To use QConvergeConsole VMware vCenter Server Plug-in, install the following
software in this order:
1. QConvergeConsole VMware vCenter Server Plug-in on the vCenter
Server
2. QLogic Adapter CIM Provider on the ESXi server
The following sections explain how to install and uninstall the required software:
 Installation Package Contents
 Installing the QConvergeConsole VMware vCenter Server Plug-in
 Plug-in Unregistration from a Manual Install
 Uninstalling the QConvergeConsole VMware vCenter Server Plug-in
 Installing the QLogic Adapter CIM Provider
 Uninstalling the QLogic Adapter CIM Provider
For information on installing the Plug-in, refer to “Installing the QConvergeConsole
VMware vCenter Server Plug-in” on page 18.