Users Guide

2–Driver Installation and Configuration
Windows Driver Installation and Configuration
8 BK3254601-00 J
5. Complete the wizard’s Setup Type window (Figure 2-4) as follows:
a. Select one of the following setup types:
 Click Complete to install all program features.
 Click Custom to manually select the features to be installed.
b. To continue, click Next.
If you selected Complete, proceed directly to Step 6 b.
Figure 2-4. InstallShield Wizard: Setup Type Window
6. If you selected Custom in Step 5, complete the Custom Setup window
(Figure 2-5 on page 9) as follows:
a. Select the features to install. By default, all features are selected. To
change a feature’s install setting, click the icon next to it, and then
select one of the following options:
 This feature will be installed on the local hard drive—This
setting marks the feature for installation without affecting any of
its subfeatures.
 This feature, and all subfeatures, will be installed on the
local hard drive—This setting marks the feature and all of its
subfeatures for installation.
 This feature will not be available—This setting prevents the
feature from being installed.