Users Guide

C–QConvergeConsole GUI
Downloading QConvergeConsole Documentation
130 BK3254601-00 J
Note the following:
 QConvergeConsole GUI works with the Windows Server, Red Hat Linux
®
Advanced Server and Enterprise Server, Novell
®
SUSE
®
Linux Enterprise
Server (SLES
®
), and Oracle Linux—Unbreakable Enterprise Kernel (UEK).
Multiple operating system support allows control of heterogeneous
environments.
 QConvergeConsole GUI runs on the following Web browsers:
Google Chrome™, Mozilla
®
Firefox
®
, Microsoft
®
Internet Explorer
®
, Opera
®
,
Apple
®
Safari
®
. For details on browser versions, see the
QConvergeConsole Readme, which you can download atwww.marvell.com
.
Downloading QConvergeConsole Documentation
To download the Installation Guide—QConvergeConsole GUI (part number
SN0051105-00), go to www.marvell.com
.
Downloading and Installing Management Agents
To manage the adapters on a local or remote host, the management agents (also
called agents) used by the host’s adapters must already be installed on the host.
The agent for Fibre Channel is qlremote.
To connect to a remote host, at least one management agent used by any of the
host’s adapters must be installed and running on the host. Only protocols whose
agents are installed and running are shown under the host’s system tree node.
Management agents are not automatically installed by the QConvergeConsole
GUI installer and must be downloaded and installed separately. You can download
the agents from the Marvell Web site Downloads page, or using the built-in Agent
Installer.
Installing the Agents from the Marvell Web Site
To obtain the agents from the Marvell Web site and install them (Windows
and Linux, all versions):
1. Go to www.marvell.com
.
2. Point to Support, and then under Driver Downloads, click Marvell
QLogic/FastLinQ Drivers.
NOTE
Some auxiliary help features, such as the Search and Index tools, may not
work properly in every Web browser.