Users Guide

129 BK3254601-00 J
C QConvergeConsole GUI
This appendix provides the following information about QConvergeConsole GUI:
 Introduction to QConvergeConsole GUI
 “Downloading QConvergeConsole Documentation” on page 130
 “Downloading and Installing Management Agents” on page 130
 “Installing QConvergeConsole GUI” on page 131
 “What Is in the QConvergeConsole Help System” on page 134
Introduction to QConvergeConsole GUI
QConvergeConsole GUI is a Web-based client and server GUI management tool
that provides centralized management and configuration of QLogic adapters
within the entire network (LAN and SAN).
On the server side, QConvergeConsole GUI runs as an Apache Tomcat™
application server. After QConvergeConsole GUI is launched on the application
server, you can connect to QConvergeConsole GUI through a browser, either
locally on the server or remotely from another computer. Your browser window
becomes the client used to connect to servers that host the QLogic adapters and
connected storage devices within the network.
Use the QConvergeConsole GUI main window to connect to servers that host
QLogic adapters. Each host server can include a combination of the following
QLogic adapters:
 32Gb Fibre Channel Adapters (QLE274x-DEL, QLE274xL-DEL)
 32Gb Fibre Channel Mezzanine Card (QME2742-DEL)
NOTE
For information on installing QConvergeConsole GUI, refer to the Installation
Guide—QConvergeConsole GUI (part number SN0051105-00). All
procedural information for the QConvergeConsole GUI utility is covered in
the QConvergeConsole Help.