Users Guide

4–NVM Express over Fibre Channel
Host Setup
111 BK3254601-00 J
Flash Firmware Version : 9.02.05
The preceding output shows the QLE2772-DEL adapter with firmware
version 9.02.05 in RAM and flash memory.
Verifying the Availability of FC-NVMe Devices
Follow the procedures in this section to confirm FC-NVMe device availability on
Linux and Windows systems.
Verifying in Linux
In Linux, verify that the target devices are available by issuing either of the
following commands:
# lsblk
or
# nvme list
Example: lsblk Command
The following example of a portion of the lsblk output shows the FC-NVMe
attached targets. The system discovered three target controllers (nvme0, nvme1,
and nvme2). Each of these controllers has one FC-NVMe LUN behind it (n1).
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
nvme0n1 259:2 0 1G 0 disk
nvme0n1p1 259:25 0 1023M 0 part
nvme0n2 259:8 0 1G 0 disk
nvme0n3 259:12 0 1G 0 disk
nvme0n4 259:16 0 1G 0 disk
nvme0n5 259:18 0 1G 0 disk
nvme0n6 259:20 0 1G 0 disk
nvme0n7 259:22 0 1G 0 disk
nvme0n8 259:24 0 1G 0 disk
Example: nvme list Command
The following example of a portion of the nvme list output shows the
FC-NVMe attached targets.
Node SN Model Namespace Usage Format FW Rev
------- ------------------- -------- ---- ---- ----------------------- --------- -----------
nvme0n1 00-200100110dd89300 SANBlaze VLUN P3T0 1 67.11 MB / 67.11 MB 512 B + 0 B V8.x-dev
nvme1n1 00-200000110dd89200 SANBlaze VLUN P2T0 1 67.11 MB / 67.11 MB 512 B + 0 B V8.x-dev
nvme2n1 00-200000110d4d1300 SANBlaze VLUN P0T0 1 67.11 MB / 67.11 MB 512 B + 0 B V8.x-dev