Users Guide

3–Fibre Channel Configuration
Configuring FDMI
93 BK3254601-00 J
Configuring FDMI
The fabric device management interface (FDMI) enables the centralized
management of devices such as host adapters. Supported configuration for FDMI:
 QLogic 2700 Series Adapters
 Brocade 16G and 32G switches with Fabric OS (FOS) v7.3 or later
 Cisco 16G and 32G switches with NX-OS v8.3.1 or later
This section provides the following information on the FDMI:
 Brocade Switch FOS CLI
 Fabric Features
 FDMI Enhancements Support
NOTE
i
Results can be viewed from Switch CLI. If the Fibre Channel switch does not
support FDMI-2, it falls back to FDMI-1 support.