Users Guide

3–Fibre Channel Configuration
Configuring End-to-End CS_CTL QoS
90 BK3254601-00 J
Figure 3-37 shows an example.
Figure 3-37. Creating vPorts in QConvergeConsole GUI
To create a vPort in interactive QConvergeConsole CLI:
1. On the Main Menu, select Adapter Configuration.
2. On the Adapter Type Selection menu, select Virtual Ports (NPIV).
3. On the Virtual Ports menu, select Adapter Port.
4. On the Adapter Port menu, select Create vPorts.
5. On the Create vPorts menu, select Generate.
6. To create the vPorts, select Commit.
Changing the vPort Priority Level
To change the vPort priority level using QConvergeConsole GUI:
1. In the QConvergeConsole GUI left pane, connect to the host that contains
the 2700 Series Adapter whose vPort levels you want to change.
2. Expand the host in the left pane by clicking the plus sign (+).
3. Locate and expand the 2700 Series Adapter whose vPort levels you want to
change.
4. In the right pane, click the QoS tab.
5. In the QoS Type box, select Priority.
6. Ensure that the check box for the vPort you want to change is selected.
7. Set the QoS priority value for the vPort by moving the corresponding slider.