Users Guide

3–Fibre Channel Configuration
Configuring CS_CTL QoS
85 BK3254601-00 J
Enabling CS_CTL QoS Mode for the Initiator and Target Ports
Figure 3-33 shows how to enable CS_CTL QoS mode for the initiator and target
ports.
Figure 3-33. Enabling CS_CTL QoS Mode
Verifying and Confirming CS_CTL Mode Setup for Each Port
Figure 3-34 shows how to verify the CS_CTL mode setup for each port.
Figure 3-34. CS_CTL Mode Setup for Each Port
Creating a Virtual Port from the Adapter’s Port in
QConvergeConsole GUI
To create a virtual port in QConvergeConsole GUI:
1. In the QConvergeConsole GUI content pane on the left, select the Host tab.
2. On the Host page, expand the adapter node, and then select a port.
3. In the content pane on the right, select the Virtual tab.
4. On the Virtual page under Create New Virtual Port, specify the Number of
vPort to create, and then click Update.
5. Click Create.