Install Guide

5–Troubleshooting
Installing QLogic QConvergeConsole Beside SSMC and vPower NFS Service
Doc. No. TD-000966 Rev. 1
January 21, 2021 Page 53 Copyright © 2021 Marvell
19. Click the MBA Boot Cfg tab, and then complete the following on the MBA
Boot Cfg page (Figure 5-12):
a. For the Hide Setup Prompt option, select Enabled.
b. Click Apply.
Figure 5-12. MBA Boot Cfg Page
20. Complete the password information as follows:
a. Type the appropriate password in the Password box.
b. Select the Save password for current session check box (if
applicable).
c. Click OK.
NOTE
If the password is not yet set up, the default password is config.