Install Guide

5–Troubleshooting
Installing QLogic QConvergeConsole Beside SSMC and vPower NFS Service
Doc. No. TD-000966 Rev. 1
January 21, 2021 Page 51 Copyright © 2021 Marvell
12. Take note of the URL provided as shown in Figure 5-10, and then click
Done.
Figure 5-10. QConvergeConsole Installer
13. Start installing the necessary management agents.
14. To check if TCP ports 8080, 8443, and 111 are in use (after all the
management agents have been installed), issue the following command:
netstat -ano | find "0.0.0.0:<port number>"
NOTE
When you start the installation, the installer will install the
ONCPortmap service.