Install Guide

3–Getting Started
Starting QConvergeConsole GUI
Doc. No. TD-000966 Rev. 1
January 21, 2021 Page 28 Copyright © 2021 Marvell
Opening QCC GUI on the Local Server
To locally open QCC GUI:
1. Open a Web browser window.
2. In the address bar, type the following, and then press the ENTER key.
For a non-secure connection:
http://localhost:<port_number>/QConvergeConsole
Where <port_number> is the port number you specified during
QConvergeConsole installation. The default port number is 8080.
For a secure (SSL) connection:
https://localhost:<SSL_port_number>/QConvergeConsole
The main page of QConvergeConsole GUI opens. Figure 3-1 shows an
example.
Figure 3-1. QConvergeConsole GUI Main Page (Example)
Opening QCC GUI on a Remote Server
To open QCC GUI on a remote server:
1. Open a Web browser.
2. In the address bar, type the following, and then press ENTER.
For a non-secure connection:
http://<server_ip>:<port_number>/QConvergeConsole/