Install Guide

2–Installing QConvergeConsole GUI
Uninstalling QConvergeConsole GUI
Doc. No. TD-000966 Rev. 1
January 21, 2021 Page 26 Copyright © 2021 Marvell
 iqlremote for iSCSI
 NetQLRemote for Ethernet NIC on x86
 NQLRemote for Ethernet NIC on SPARC
®
and x86
To uninstall agents installed using p5p files (Solaris 11.4 only):
 To uninstall QConvergeConsole Solaris agents that were installed using
.p5p format files, issue the following command:
pkg uninstall <agent>
Where <agent> is one of the following:
 qlremote for Fibre Channel or FCoE
 iqlremote for iSCSI
 netqlremote for Ethernet NIC
Uninstalling QConvergeConsole GUI in a Console Window
On Windows, Linux, and Solaris systems, you can use a console window to
uninstall QConvergeConsole GUI.
To run the uninstaller from a console window:
 Issue the following command:
<uninstaller_file_name>
Where <uninstaller_file_name> is the name of the executable file
for the QCC GUI uninstaller.
Figure 2-2 shows an example of running the uninstaller in a console window.
Figure 2-2. Example of Console Window Uninstallation