Install Guide

2–Installing QConvergeConsole GUI
Installing QConvergeConsole GUI
Doc. No. TD-000966 Rev. 1
January 21, 2021 Page 19 Copyright © 2021 Marvell
7. The Pre-Installation Summary dialog box opens. Confirm the information,
and then click Install.
8. (Optional) Complete the following in the Security Login Configuration:
a. Type a value in the Login ID box.
b. Type a value in the Password box.
c. If applicable, select the Check this box to enable Security Login
check box.
d. Click Next.
9. A message box prompts you to confirm if you want to enable the secure
socket layer (SSL) feature, which allows data to be encrypted within a
secure layer before passing it to and from the server:
 Yes - Click to enable the SSL feature.
 No - Click to disable the SSL feature.
10. In the Tomcat SSL Port Number Setup dialog box, type a valid SSL port
number in the range 1025–65536, or accept the default port number, 8443.
Then click Next to continue.
11. In the Install Complete dialog box, click Done to exit the installer.
NOTE
S
 See “Starting QConvergeConsole GUI” on page 27 to start
QConvergeConsole GUI
 Some adapters may not support all three protocol agents; check your
adapter’s specifications to confirm.
 QConvergeConsole GUI records all installation activities in the log file,
QConvergeConsole_InstallLog.log, located in the installation
directory /opt/QLogic Corporation/QConvergeConsole. If the
installation fails, review this log file to find a possible source of failure.