Install Guide

Table Of Contents

2–Installing QConvergeConsole GUI

Downloading and Installing Management Agents

Doc. No. TD-000966 Rev. 1

To install the Solaris agents using package files:

1. Each agent installer package is provided in compressed format and must be

uncompressed to obtain the installable package. To uncompress the

package, issue the following Solaris command:

uncompress <agent>-<version>-solaris-<platform>.pkg.Z

2. The uncompress command creates a package file named as follows:

<agent>-<version>-solaris-<platform>.pkg

3. To install QConvergeConsole Solaris agents in .pkg format, issue the

following Solaris command:

pkgadd -d <agent>-<version>-solaris-<platform>.pkg

Installation with p5p Files (Solaris 11 or Later)

To install the p5p installer, select one of the following options:

 Option 1: Install the Solaris agents by issuing the p5p installer command:

pkg install -g <agent>-<version>-solaris-<arch>.p5p qlremote

 Option 2: Install the Solaris agents using p5p files:

1. Set the environment by issuing the following command:

export PKGREPO=/pkgrepo

2. Create the repository by issuing the following command:

pkgrepo create $PKGREPO

3. Receive the package in your repository by issuing the following

command:

pkgrecv -s /<agent>-<version>-solaris-<platform>.p5p -d

$PKGREPO <agent>

4. Set the publisher by issuing the following command:

pfexec pkg set-publisher -p $PKGREPO

5. Continue the installation by issuing the following command:

pkg install <agent>

NOTE

FastLinQ Adapters (3400/8400/41000/45000 Series) currently do not

support Solaris.