Install Guide

2–Installing QConvergeConsole GUI
Downloading and Installing Management Agents
Doc. No. TD-000966 Rev. 1
January 21, 2021 Page 10 Copyright © 2021 Marvell
5. To disable the firewall, issue the following command:
ufw disable
Installing Agents on Solaris
To install agents on Solaris:
1. Download the following for each adapter on the host server:
 Solaris 10, 11: Installer package files
 Solaris 11: p5p files
2. Install one or more agents as described in “Installation with Package Files
(Solaris 11.4)” on page 10 or “Installation with p5p Files (Solaris 11 or Later)”
on page 11.
Installation with Package Files (Solaris 11.4)
NOTE
S
For more detailed Firewall configuration, go to the following Web site:
https://help.ubuntu.com/community/UFW
NOTE
FastLinQ Adapters (45000 Series) currently do not support Solaris.
NOTE
In each Solaris command in this section, <agent> is the name of one of
the following management agents (issue each command once per agent
being installed):
 qlremote for Fibre Channel or FCoE
 iqlremote for iSCSI
 netqlremote for NIC
 <version> is the version number found in the package file name.
 <platform> is either i386 or SPARC.
NOTE
S
The QLNXRemote agent is not available in Solaris 11.4.
FastLinQ Adapters (45000 Series) currently do not support Solaris.