Install Guide

2–Installing QConvergeConsole GUI
Downloading and Installing Management Agents
Doc. No. TD-000966 Rev. 1
January 21, 2021 Page 9 Copyright © 2021 Marvell
Installing the Agents from Downloads
The following procedures show how to install the netqlremote, qlremote,
iqlremote, and qlnxremote agents downloaded from the Marvell Web site.
Agent installation by downloading includes the following information:
 Installing Agents on Windows and Linux
 Installing Agents on Ubuntu
 Installing Agents on Solaris
Installing Agents on Windows and Linux
To install agents on Windows and Linux (all supported versions):
1. Download the following for each adapter on the host server:
 Read Me
 Release Notes
2. Install the agents by running the appropriate installer. For detailed
information on running the installer, see the Read Me and Release Notes.
Installing Agents on Ubuntu
To install agents on Ubuntu 14.04 (for qlremote and qlnxremote agents
only):
1. To install the alien, issue the following command:
apt-get install alien
2. To install rpcbind, issue the following command:
apt-get install rpcbind
3. To run the installer, issue the following command:
alien -i --scripts -k ./<installer name.rpm>
4. To install libtcl 8.4 (for qlnxremote agents only), issue the following
command:
apt-get install libtcl8.4
NOTE
Marvell supports N-1. Because the latest Ubuntu KLTS is 18.04, install
qlremote using the alien.