Install Guide

Doc. No. TD-000966 Rev. 1
January 21, 2021 Page 1 Copyright © 2021 Marvell
1 System Requirements
QConvergeConsole GUI is a Web-based client and server GUI management tool
that provides centralized management and configuration of Marvell QLogic and
FastLinQ adapters within the entire network (LAN and SAN).
On the server side, QConvergeConsole GUI runs as an Apache Tomcat
™
application server. After QConvergeConsole GUI is launched on the application
server, you can connect to QCC GUI through a browser, either locally on the
server or remotely from another computer. Your browser window becomes the
client used to connect to servers that host the Marvell QLogic adapters and
connected storage devices within the network.For optimum performance,
QConvergeConsole GUI requires the hardware, software, and operating systems
listed in this chapter:
 Hardware Requirements
 “Software Requirements” on page 2
 “Operating System Requirements” on page 3
 “Supported QLogic and FastLinQ Adapters” on page 4
 “Using QConvergeConsole GUI” on page 5
Hardware Requirements
QConvergeConsole GUI requires the following minimum hardware:
Apache Tomcat application server
 Server—Single processor or multiprocessor equivalent to an Intel
®
or AMD
Core™ Duo running at 2GHz or greater. For operating systems on which the
Web browser can run, see “Operating System Requirements” on page 3.
 Memory—2GB of physical RAM to run QConvergeConsole GUI; 4GB
recommended. Running with less memory can cause disk swapping, which
severely affects performance.
 Video card—Capable of 16K colors and a resolution of 1280×960 pixels
 Hard disk space—512MB disk space