Setup Guide


53
DellProtectedWorkspaceManagementServer–Ins tallandConfigure–v2.2

Tocompletethesyslogconfiguration, thesyslogserviceneedstoberestarted(orstartedifitwasnotrunning).Todo
this,navigatetothe03CustomCommandsmenuandusetheSyslogcommands.
TestingSYSLOGconnectionfromDPWMS
TovalidatethattheDPWMSissendingdatatotheconfiguredSYSLOGdestinationserver,gotothe“03Custom
Commands”menufromthe“InvinceaServerManagement”Menu.
ListedundertheCustomCo mmandsMenuisacommandlabeled“DPWMSSyslogTestCommand.”Clickonthis
commandlinktosendadestinationto
thespecifieddestinationserver.

Oncethecommandisrun,verifythattheSYSLOGdestinationserverreceivedaSYSLOGmessagewiththetext“DPWMS
SyslogControlTest.”Ifthismessagewasreceivedbythedestinationserver,SYSLOGreportingisworkingcorrectly.
