Setup Guide


29
DellProtectedWorkspaceManagementServer–InstallandConfigure–v2.2
ApplyingNewUpdatesviatheUI
ServerupgradescannowbedoneviatheDPWMSmanagementconsoleforsingleAPIsystems(multipleAPIsystems
mustmanuallyupgradeeachAPI/UIsystem).Thefollowingstepsoutlinetheprocess toupgradetoanewDPWMS
release.
1. LogintotheDPWMS2.xUIwithanadminlevelaccount
2. From
theAdmintab,clickonthe“Upgrades”tab
3. OntheUpgradestab,pressthe“InstallUpgrade…”button

4. FromtheInstallUpgradedialog,browsetothedownloadedtgzupgradefile(thisfileshouldbeintheformat:
dpwms‐y.y.y‐xxxxx‐x86_64.tgz)
5. Afterthefilehasbeenselected,
pressthe“Upload”button

6. Whenthe“Upload”buttonispressed,theupdatewillbeuploadedtotheserverandapplied,andoncethathas
beenfinish,theDPWMS(ims2)servicewillrestart.IftheUIhangsordoesnotrestartautomatically,amanual
restartoftheDPWMS(ims2)service
maybeneeded.
7. TorestarttheDPWMS(ims2)servicemanually,browsetothebackendmanagementpage(port10000)andgo
tothe“03‐CustomCommands”module.
