Users Guide

Projector Status
Projector Status: Allows you to select the Power On or Power Off .
Power Saving: Allows you to set the power saving mode time. The default is 20 minutes.
Alert Status: There are three alert states: Lamp warning, Low lamp life, and Temperature
warning. Your projector might lock up in the protection mode if any of the alerts are activated.
To exit the protection mode, click Clear to clear the Alert Status before you power on your
projector.
Image Status
Projector Mode: Allows you to select the projector mode, depending on how the projector is
mounted. There are four projection modes: Front Projection-Desktop, Front Projection-Ceiling
Mount, Rear Projection-Desktop, and Rear Projection-Ceiling Mount.
Source Select: Allows you to select your projector s input source. You can select VGA,
Composite, HDMI-1, and HDMI-2.
Video Mode: Select a mode to optimize the display image based on how the projector is being
used:
- Presentation: Best for presentation slides.
- Bright: Maximum brightness and contrast.
- Movie: For viewing movies and photos.
- sRGB: Provides a more accurate color representation.
- Custom: User-preferred settings.
Blank Screen: Allows you to select the Enable or Disable.
Aspect Ratio: Allows you to select the aspect ratio to adjust how the image appears.
Brightness: Select the value (0~100) to adjust the brightness of the image.
Contrast: Select the value (0~100) to adjust the display contrast.
Audio Control
Speaker: Allows you to select the Enable or Disable.
Volume: Select the value (0~20) for audio volume.