Users Guide

Icon Severity Level
Warning/Noncritical — A probe or other monitoring device has
detected a reading for the component that is above or below the
acceptable level. The component may still be functioning, but it
could fail. The component may also be functioning in an impaired
state.
Critical/Failure/Error — The component has either failed or failure
is imminent. The component requires immediate attention and may
need to be replaced. Data loss may have occurred.
The specific component is not monitored.
The service is unavailable.
Views
You can monitor the Dell printers using the following views:
• Alerts Views
• Diagram Views
• State Views
Alerts Views
Figure 1. Alerts Views
To view the alerts for the printers you are monitoring:
1. In the OpsMgr console, click Monitoring.
2. In the Monitoring pane, navigate to the Dell folder and click the folder to display the different views.
3. Click Alerts Views > Printer (OM07) Alerts or Printer (OM12) Alerts.
The OpsMgr console displays the alerts for all the Dell printers that you are monitoring in the printer alerts pane.
4. Select an alert to view the details in the Alert Details pane.
Dell Printer Management Pack operations
7