User's Manual

NOTE: The default setting is True.

• Interval In Seconds — Indicates the interval between each periodic poll that monitors the availability and health

of your printer. The default value for this attribute is 21600 seconds (6 hours).

Object Discoveries

You can customize the Dell Printer Management Pack discovery parameters, using the following overrides:

• Enabled — Allows you to enable or disable discoveries. You can set the Override Setting to True or False.

NOTE: The default setting is True.

• Interval in Seconds — Specifies the frequency in seconds that the Dell Management Pack discovers the

component instance and attributes of your Dell printer. The default value for this attribute is 86400 seconds (24

hours).

Customizing Alert Rules

You can customize the alert rules by setting override parameters for the rules. To customize the rules:

1. In the OpsMgr console, click Authoring.

2. In the Authoring pane, navigate to Management Pack Objects and click Rules.

3. In the Rules pane, expand the Dell printer instance and select a rule.

4. Right-click the rule and select Overrides.

5. Select Disable the Rule and any of the sub-options to disable the rule.

Select Override the Rule and any of the sub-options to set the override parameters for the rule.

You can also change the severity setting for the rule.

6. Click OK to apply the override parameter to your rule or click Cancel to cancel the changes.