User's Manual

16 Dell Printer Management Pack Operations
Customizing the Dell Printer Management Pack
The Dell Printer Management Pack allows you to customize discovery and
monitoring of your Dell devices. You can customize the following
components:
• Monitors : Assesses various conditions that can occur in monitored objects.
The result of this assessment determines the health state of a target and
the alerts that are generated.
•
Object Discoveries : Find objects on a network that need to be monitored.
NOTE: For more information, see SCOM 2007 SP1/ R2 documentation.
Unit Monitors
You can customize the following parameters of the Dell Printer Management
Pack unit monitors by using overrides:
• Enabled : Allows you to enable or disable Monitors. You can set the
Override Setting to True or False.
NOTE: The default setting is True.
• Interval in Seconds : The frequency (in seconds) with which the Dell
Management Pack polls the Dell device to check the health of a
component. The default is 3600 seconds (60 minutes).
•
Unit Monitor: Monitor triggered by a periodic poll configured as
IntervalSeconds. The default value for this attribute is 21600 seconds (6
hours).
This is a Unit Monitor for printer availability and it indicates the health of
your Dell printer.
book.book Page 16 Tuesday, October 4, 2011 3:24 PM