Dell Printer Management Pack Version 4.
This release notes provides information on the Dell Printer Management Pack version 4.1, which can be imported into Microsoft System Center Operations Manager (SCOM) 2007 SP1/R2 and System Center Essentials (SCE) 2007 SP1/2010. NOTE: All references to Operations Manager are also applicable to System Center Essentials. The Dell Printer Management Pack version 4.1 enables SCOM/SCE to discover and monitor the status of Dell Printer devices, on a defined network segment.
• • • • • • • • • • • • • • • • • • • • • • • • Dell 2145cn Color Laser Multifunction Printer Dell 2150cn/cdn Color Laser Printer Dell 2155cn/cdn Color Laser Printer Dell 2330dn Mono Laser Printer Dell 2335dn Mono Laser Multifunction Printer Dell 2350dn Mono Laser Printer Dell 2355dn Mono Laser Printer Dell 3010cn Color Laser Printer Dell 3110cn Color Laser Printer Dell 3115cn Color Laser Multifunction Printer Dell 3130cn Color Laser Printer Dell 3330dn Mono Laser Printer Dell 3333dn Mono Laser Printer Del
• • If the Printer Console launch displays a "Page cannot be displayed" error, ensure that there is network connectivity from the device, and the device is configured with a valid IP address. The Unit Monitor "Device Status Check" is disabled for all Dell printers in the Dell Printer Management Pack. NOTE: A user can enable the "Device Status Check" Unit Monitor if required, by using overrides in a custom management pack.
Corrected Problems The following problems were reported in earlier releases of Printer Management Pack version 4.0 and have been corrected in this release: Issue 1 - DF338777: Invalid Input Vendor name and Output Vendor name attribute of 7330n printer. Description Discover 7330n printer in SCOM Console. Compare the attributes shown in SCOM Console with SNMP Walk. Invalid values are displayed in "Input Vendor Name" and "Output Vendor Name" in SCOM Console.
