User's Manual

Understanding Dell™ Printer Management Pack Operations 17
To access the State View:
1
In the Operations Console, click Monitoring .
2 In the Monitoring pane, click State View → Printer .
The Operations Console displays the status of all the Dell printers that you
are monitoring on the right pane.
3 Select a state to view its details in the Detail view.
State Components and Severity Levels
Tasks
Tasks are available in the Actions pane of the Operations Console. When you
select a device or a component in any of the Dell diagram views, the relevant
tasks appear in the Actions pane.
NOTE: You can run the tasks from the Diagram view, State view, or the Alert view.
Table 3-1. Severity Level Indicators
Icon Severity Level
Normal/OK. The component is working as expected.
Warning/Noncritical. A probe or other monitoring device has detected a
reading for the component that is above or below the acceptable level. The
component may still be functioning, but it could fail. The component may
also be functioning in an impaired state.
Critical/Failure/Error.The component has either failed or failure is imminent.
The component requires immediate attention and may need to be replaced.
Data loss may have occurred.
The health status is not applicable for the specific component.
The service is unavailable.
book.book Page 17 Monday, November 9, 2009 5:27 PM