Owner's Manual

file:///T|/htdocs/SOFTWARE/smconect/msscom/40PrinterMP/en/readme/DellMPv40_Printer_Readme.txt[10/19/2012 12:59:47 PM]

* "Launch Printer Console Task" will only be available in the System

Center operations console. The System Center Operations Manager Web

Console will not have this task available.

* In the System Center Operations Manager Web Console, the printer

attributes will not be seen as part of the tool tip.

* If the Printer Console launch displays a "Page cannot be displayed"

error, ensure that there is network connectivity from the device,

and the device is configured with a valid IP address.

* The Unit Monitor "Device Status Check" is disabled for all Dell

printers in the Dell Printer Management Pack.

NOTE: A user can enable the "Device Status Check" Unit Monitor if

required, by using overrides in a custom management pack.

#####################################################################

KNOWN ISSUES

#####################################################################

* After you remove the management pack, you will need to close and

re-open the SCOM console for a complete cleanup (DF310069)

* After deleting a printer from network devices, you may continue

to see old Alerts associated with the IP of deleted printer in the

Dell Printer Alerts view. You can remove these alerts by re-opening

the SCOM console using the 'clearcache' option. (DF350807)

* In the Diagram view for Dell printer devices, the basic attributes

for the Dell printer objects are displayed. You can view the

detailed set of attributes by clicking on the objects in the State

view. (DF337321)

* For the 7330n printer, the attributes "Input Vendor Name" and

"Output Vendor Name" may have improper values. (DF338777)

* For Dell printers that have more than one value for a printer

attribute in the SNMP table, only the first value will be seen

corresponding to the printer attribute in the State View. (DF337877)

#####################################################################

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission

of Dell Inc. is strictly forbidden.

Trademarks used in this text: "Dell" is a trademark of Dell Inc.;

"Microsoft," "Windows," and "Windows Server",

"System Center Operations Manager" are either trademarks or

registered trademarks of Microsoft Corporation in the United States