Owners Manual

5. Repeat steps 3 to remove the additional hard drive (if available).

Installing the hard drive assembly

1. Insert the hard drive into the hard drive bracket.

2. Press the securing brackets and slide the hard drive assembly into the bay.

3. Connect the data cable and the power cable to the hard drive.

4. Install the cover.

5. Follow the procedure in After Working Inside Your Computer.

Removing the optical drive

1. Follow the procedure in Before Working Inside Your Computer.

2. Remove the:

a) cover

b) front bezel

3. To release the optical drive :

a) Remove the hard drive connector cables from the optical drive latch [1].

b) Slide the blue latch to the unlock position [2].

4. To remove the optical drive:

a) Hold the blue latch [1], lift the optical drive cage and disconnect the cables from the optical drive [2].

Removing and installing components