Owners Manual

Installing the front bezel
1. Insert the tabs on the bezel into the slots on the computer.
2. Press the bezel until the tabs clicks into place.
3. Install the cover.
4. Follow the procedure in After Working Inside Your Computer.
Removing the hard drive assembly
1. Follow the procedure in Before Working Inside Your Computer.
2. Remove the cover.
3. To release the hard drive assembly:
a) Disconnect the data cables from the hard drives [1].
b) Lift the hard drive assembly away from the computer [2].
4. To remove the hard drive bracket:
a) Pull one side of the hard drive bracket to disengage the pins on the bracket from the slots on the hard drive [1].
b) Lift the hard drive out of the hard drive bracket [2].
8
Removing and installing components