Owners Manual

Table 11. POST behavior
Option Description
Numlock LED Allows you to specify if the NumLock function is enabled when the system boots. This option is
enabled by default.
MEBx Hotkey Allows you to specify whether the MEBx Hotkey function should be enabled when the system
boots. This option is enabled by default.
Keyboard Errors Specifies whether keyboard related errors are reported when it boots. This option is enabled by
default.
Table 12. Virtualization support
Option Description
Virtualization This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities provided by Intel Virtualization technology.
• Enable Intel Virtualization Technology - This option is enabled by default.
VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware
capabilities provided by Intel Virtualization technology for direct I/O.
• Enable VT for Direct I/O - This option is enabled by default.
Trusted Execution Allows you to specify whether a Measured Virtual Machine Monitor (MVMM) can utilize the
additional hardware capabilities provided by Intel Trusted Execution Program.
• Trusted Execution - This option is disabled by default.
Table 13. Maintenance
Option Description
Service Tag Displays the service tag of your computer.
Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This option is not set by
default.
SERR Messages Allows you to control the SERR message mechanism. This option is not set by default. Some
graphics cards require that the SERR message mechanism be disabled.
BIOS Downgrade Allows you to control the flashing of the system firmware to previous revisions. This option is
enabled by default.
Data Wipe Allows you to securely erase data from all internal storage devices. The option is disabled by
default.
BIOS Recovery Allows you to recover from certain corrupted BIOS conditions using a recovery file. This option is
enabled by default.
Table 14. Cloud desktop
Option Description
Server Lookup Method Allows you to specify how the Cloud Desktop software will lookup server addresses. The options
are:
• Static IP
• DNS (default)
Server Name Allows you to specify the Server Name of the server.
Server IP Address Specifies the primary static IP address of the Cloud Desktop Server with which the client software
communicates. The default setting is 255.255.255.255
Server Port Allows you to specify the primary IP port of the Cloud Desktop with which the client software
communicates. The default setting is 06910.
Client Address Method Allows you to specify how the client will obtain its IP address. The options are:
• Static IP
System Setup 29