Owners Manual

Option Description
Intel SpeedStep Allows you to enable or disable the Intel SpeedStep feature.
Default Setting: Enable Intel SpeedStep
C-States Control Allows you to enable or disable the additional processor sleep states.
C states (This option is selected by default)
Limit CPUID Value This field limits the maximum value the processor Standard CPUID Function will support.
• Enable CPUID Limit
Default Setting: The option is disabled.
Table 10. Power management
Option Description
AC Recovery Specifies how the computer will respond when AC power is applied after a AC power loss. You can
set the AC Recovery to:
• Power Off (Default)
• Power On
• Last Power State
Auto On Time Allows you to set the time at which the computer must turn on automatically. The options are:
• Disabled (Default)
• Every Day
• Weekdays
• Select Days
Deep Sleep Control Allows you to define the controls when Deep Sleep is enabled.
• Disabled (Default)
• Enabled in S5 only
• Enabled in S4 and S5
Fan Control Override Allows you to control the speed of the system fan. The options are:
• Fan Control Override
Default Setting: The option is disabled.
USB Wake Support Allows you to enable USB devices to wake the system from standby.
• Enable USB Wake Support
Default Setting: The option is disabled.
Wake on LAN/WLAN This option allows the computer to power up from the off state when triggered by a special LAN
signal. Wake-up from the Standby state is unaffected by this setting and must be enabled in the
operating system. This feature only works when the computer is connected to AC power supply.
• Disabled (Default)
• LAN Only
• WLAN Only
• LAN or WLAN
• LAN with PXE Boot
Block Sleep Allows you to block entering to sleep (S3 state) in OS Environment.
Block Sleep (S3 State)
This option is disabled by default.
Intel Ready Mode This option allows you to enable the capability of Intel Ready Mode Technology.
Enable Intel Ready Mode (this option is disabled by default)
28 System Setup