Owners Manual

Option Description
• Enabled w/Cloud Desktop
Serial Port Identifies and defines the serial port settings. You can set the serial port to:
• Disabled
• COM1 (Default)
• COM2
• COM3
• COM4
NOTE: The operating system may allocate resources even if the setting is disabled.
SATA Operation Allows you to configure the internal SATA hard-drive controller. The options are:
• Disabled
• AHCI
• RAID On (Default)
Drives Allows you to configure the SATA drives on board. The options are:
• SATA-0
• SATA-1
• SATA-2
• M.2 PCIe SSD-0
Default Setting: All drives are enabled.
SMART Reporting This field controls if the hard drive errors for the integrated drives are reported during system
startup. This technology is part of the SMART (Self Monitoring Analysis and Reporting
Technology) specification.
• Enable SMART Reporting - This option is disabled by default.
USB Configuration Allows you to enable or disable the USB configuration. The options are:
• Enable Boot Support
• Enable Front USB Ports
• Enable rear USB Ports
Front USB Configuration Allows you to enable or disable the Front USB configuration. The options are:
• Front Port 1
• Front Port 2
• Front Port 3
• Front Port 4
Rear USB Configuration Allows you to enable or disable the rear USB configuration. The options are:
• Rear Port 1
• Rear Port 2
• Rear Port 3
• Rear Port 4
• Rear Port 5
• Rear Port 6
Thunderbolt Allows you to enable or disable Thunderbolt device support capability. The options are:
• Enabled (Default)
• No Security
• User Configuration
• Secure Connect
• Display Port Only
USB PowerShare Allows you to enable or disable USB PowerShare.
Enable USB PowerShare -This option is disabled by default.
System Setup 25